details

property	value
status	complete
benchmark	CookSeeZuleger-TACAS2013-Fig1_true-termination.c
ran by	Akihisa Yamada
cpu timeout	1200 seconds
wallclock timeout	300 seconds
memory limit	137438953472 bytes
execution host	n181.star.cs.uiowa.edu
space	SV-COMP_Termination_Category

run statistics

property	value
solver	UltimateAutomizer2019
configuration	default
runtime (wallclock)	9.31581 seconds
cpu usage	14.8269
user time	14.0861
system time	0.740775
max virtual memory	6.0642452E7
max residence set size	471096.0

stage attributes

key	value
starexec-result	YES

output

14.74/9.31 YES 14.74/9.31 14.81/9.31 Ultimate: Cannot open display: 14.81/9.31 This is Ultimate 0.1.24-8dc7c08-m 14.81/9.31 [2019-03-28 12:02:47,853 INFO L170 SettingsManager]: Resetting all preferences to default values... 14.81/9.31 [2019-03-28 12:02:47,855 INFO L174 SettingsManager]: Resetting UltimateCore preferences to default values 14.81/9.31 [2019-03-28 12:02:47,867 INFO L177 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,867 INFO L174 SettingsManager]: Resetting Boogie Preprocessor preferences to default values 14.81/9.31 [2019-03-28 12:02:47,868 INFO L174 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values 14.81/9.31 [2019-03-28 12:02:47,869 INFO L174 SettingsManager]: Resetting Abstract Interpretation preferences to default values 14.81/9.31 [2019-03-28 12:02:47,871 INFO L174 SettingsManager]: Resetting LassoRanker preferences to default values 14.81/9.31 [2019-03-28 12:02:47,872 INFO L174 SettingsManager]: Resetting Reaching Definitions preferences to default values 14.81/9.31 [2019-03-28 12:02:47,873 INFO L174 SettingsManager]: Resetting SyntaxChecker preferences to default values 14.81/9.31 [2019-03-28 12:02:47,874 INFO L177 SettingsManager]: Büchi Program Product provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,874 INFO L174 SettingsManager]: Resetting LTL2Aut preferences to default values 14.81/9.31 [2019-03-28 12:02:47,875 INFO L174 SettingsManager]: Resetting PEA to Boogie preferences to default values 14.81/9.31 [2019-03-28 12:02:47,876 INFO L174 SettingsManager]: Resetting BlockEncodingV2 preferences to default values 14.81/9.31 [2019-03-28 12:02:47,877 INFO L174 SettingsManager]: Resetting ChcToBoogie preferences to default values 14.81/9.31 [2019-03-28 12:02:47,878 INFO L174 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values 14.81/9.31 [2019-03-28 12:02:47,879 INFO L174 SettingsManager]: Resetting BuchiAutomizer preferences to default values 14.81/9.31 [2019-03-28 12:02:47,880 INFO L174 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values 14.81/9.31 [2019-03-28 12:02:47,882 INFO L174 SettingsManager]: Resetting CodeCheck preferences to default values 14.81/9.31 [2019-03-28 12:02:47,884 INFO L174 SettingsManager]: Resetting InvariantSynthesis preferences to default values 14.81/9.31 [2019-03-28 12:02:47,885 INFO L174 SettingsManager]: Resetting RCFGBuilder preferences to default values 14.81/9.31 [2019-03-28 12:02:47,886 INFO L174 SettingsManager]: Resetting TraceAbstraction preferences to default values 14.81/9.31 [2019-03-28 12:02:47,888 INFO L177 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,888 INFO L177 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,888 INFO L174 SettingsManager]: Resetting TreeAutomizer preferences to default values 14.81/9.31 [2019-03-28 12:02:47,889 INFO L174 SettingsManager]: Resetting IcfgToChc preferences to default values 14.81/9.31 [2019-03-28 12:02:47,890 INFO L174 SettingsManager]: Resetting IcfgTransformer preferences to default values 14.81/9.31 [2019-03-28 12:02:47,890 INFO L177 SettingsManager]: ReqToTest provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,891 INFO L174 SettingsManager]: Resetting Boogie Printer preferences to default values 14.81/9.31 [2019-03-28 12:02:47,891 INFO L174 SettingsManager]: Resetting ChcSmtPrinter preferences to default values 14.81/9.31 [2019-03-28 12:02:47,892 INFO L174 SettingsManager]: Resetting ReqPrinter preferences to default values 14.81/9.31 [2019-03-28 12:02:47,893 INFO L174 SettingsManager]: Resetting Witness Printer preferences to default values 14.81/9.31 [2019-03-28 12:02:47,894 INFO L177 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,894 INFO L174 SettingsManager]: Resetting CDTParser preferences to default values 14.81/9.31 [2019-03-28 12:02:47,895 INFO L177 SettingsManager]: AutomataScriptParser provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,895 INFO L177 SettingsManager]: ReqParser provides no preferences, ignoring... 14.81/9.31 [2019-03-28 12:02:47,895 INFO L174 SettingsManager]: Resetting SmtParser preferences to default values 14.81/9.31 [2019-03-28 12:02:47,896 INFO L174 SettingsManager]: Resetting Witness Parser preferences to default values 14.81/9.31 [2019-03-28 12:02:47,897 INFO L181 SettingsManager]: Finished resetting all preferences to default values... 14.81/9.31 [2019-03-28 12:02:47,897 INFO L98 SettingsManager]: Beginning loading settings from /export/starexec/sandbox/solver/bin/./../termcomp2017.epf 14.81/9.31 [2019-03-28 12:02:47,911 INFO L110 SettingsManager]: Loading preferences was successful 14.81/9.31 [2019-03-28 12:02:47,912 INFO L112 SettingsManager]: Preferences different from defaults after loading the file: 14.81/9.31 [2019-03-28 12:02:47,913 INFO L131 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults: 14.81/9.31 [2019-03-28 12:02:47,913 INFO L133 SettingsManager]: * Rewrite not-equals=true 14.81/9.31 [2019-03-28 12:02:47,913 INFO L133 SettingsManager]: * Create parallel compositions if possible=false 14.81/9.31 [2019-03-28 12:02:47,913 INFO L133 SettingsManager]: * Minimize states using LBE with the strategy=SINGLE 14.81/9.31 [2019-03-28 12:02:47,913 INFO L133 SettingsManager]: * Use SBE=true 14.81/9.31 [2019-03-28 12:02:47,914 INFO L131 SettingsManager]: Preferences of BuchiAutomizer differ from their defaults: 14.81/9.31 [2019-03-28 12:02:47,914 INFO L133 SettingsManager]: * Use old map elimination=false 14.81/9.31 [2019-03-28 12:02:47,914 INFO L133 SettingsManager]: * Use external solver (rank synthesis)=false 14.81/9.31 [2019-03-28 12:02:47,914 INFO L133 SettingsManager]: * Buchi interpolant automaton construction strategy=DANDELION 14.81/9.31 [2019-03-28 12:02:47,914 INFO L133 SettingsManager]: * Use only trivial implications for array writes=true 14.81/9.31 [2019-03-28 12:02:47,915 INFO L133 SettingsManager]: * Rank analysis=LINEAR_WITH_GUESSES 14.81/9.31 [2019-03-28 12:02:47,915 INFO L133 SettingsManager]: * Construct termination proof for TermComp=true 14.81/9.31 [2019-03-28 12:02:47,915 INFO L133 SettingsManager]: * Command for external solver (GNTA synthesis)=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:12000 14.81/9.31 [2019-03-28 12:02:47,915 INFO L131 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults: 14.81/9.31 [2019-03-28 12:02:47,915 INFO L133 SettingsManager]: * Check unreachability of error function in SV-COMP mode=false 14.81/9.31 [2019-03-28 12:02:47,915 INFO L133 SettingsManager]: * Check division by zero=IGNORE 14.81/9.31 [2019-03-28 12:02:47,916 INFO L133 SettingsManager]: * Check if freed pointer was valid=false 14.81/9.31 [2019-03-28 12:02:47,916 INFO L133 SettingsManager]: * Assume nondeterminstic values are in range=false 14.81/9.31 [2019-03-28 12:02:47,916 INFO L133 SettingsManager]: * How to treat unsigned ints differently from normal ones=IGNORE 14.81/9.31 [2019-03-28 12:02:47,916 INFO L131 SettingsManager]: Preferences of RCFGBuilder differ from their defaults: 14.81/9.31 [2019-03-28 12:02:47,916 INFO L133 SettingsManager]: * Size of a code block=SequenceOfStatements 14.81/9.31 [2019-03-28 12:02:47,916 INFO L133 SettingsManager]: * To the following directory=/home/matthias/ultimate/dump 14.81/9.31 [2019-03-28 12:02:47,917 INFO L133 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 14.81/9.31 [2019-03-28 12:02:47,917 INFO L131 SettingsManager]: Preferences of TraceAbstraction differ from their defaults: 14.81/9.31 [2019-03-28 12:02:47,917 INFO L133 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles 14.81/9.31 [2019-03-28 12:02:47,917 INFO L133 SettingsManager]: * Trace refinement strategy=CAMEL 14.81/9.31 [2019-03-28 12:02:47,917 INFO L133 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true 14.81/9.31 [2019-03-28 12:02:47,943 INFO L81 nceAwareModelManager]: Repository-Root is: /tmp 14.81/9.31 [2019-03-28 12:02:47,976 INFO L259 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized 14.81/9.31 [2019-03-28 12:02:47,979 INFO L215 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected. 14.81/9.31 [2019-03-28 12:02:47,981 INFO L271 PluginConnector]: Initializing CDTParser... 14.81/9.31 [2019-03-28 12:02:47,981 INFO L276 PluginConnector]: CDTParser initialized 14.81/9.31 [2019-03-28 12:02:47,982 INFO L430 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /export/starexec/sandbox/benchmark/theBenchmark.c 14.81/9.31 [2019-03-28 12:02:48,046 INFO L221 CDTParser]: Created temporary CDT project at /export/starexec/sandbox/tmp/ebc3a6f284bb4b688c033ba3f54c336b/FLAG8b7372da2 14.81/9.31 !SESSION 2019-03-28 12:02:45.223 ----------------------------------------------- 14.81/9.31 eclipse.buildId=unknown 14.81/9.31 java.version=1.8.0_181 14.81/9.31 java.vendor=Oracle Corporation 14.81/9.31 BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US 14.81/9.31 Framework arguments: -tc ./../AutomizerAndBuchiAutomizerCInlineWithBlockEncoding.xml -s ./../termcomp2017.epf -i /export/starexec/sandbox/benchmark/theBenchmark.c 14.81/9.31 Command-line arguments: -os linux -ws gtk -arch x86_64 -consoleLog -data @user.home/.ultimate -tc ./../AutomizerAndBuchiAutomizerCInlineWithBlockEncoding.xml -s ./../termcomp2017.epf -data /export/starexec/sandbox/tmp -i /export/starexec/sandbox/benchmark/theBenchmark.c 14.81/9.31 14.81/9.31 !ENTRY org.eclipse.cdt.core 1 0 2019-03-28 12:02:50.285 14.81/9.31 !MESSAGE Indexed 'FLAG8b7372da2' (0 sources, 0 headers) in 0.007 sec: 0 declarations; 0 references; 0 unresolved inclusions; 0 syntax errors; 0 unresolved names (0%) 14.81/9.31 [2019-03-28 12:02:50,404 INFO L307 CDTParser]: Found 1 translation units. 14.81/9.31 [2019-03-28 12:02:50,405 INFO L161 CDTParser]: Scanning /export/starexec/sandbox/benchmark/theBenchmark.c 14.81/9.31 [2019-03-28 12:02:50,412 INFO L355 CDTParser]: About to delete temporary CDT project at /export/starexec/sandbox/tmp/ebc3a6f284bb4b688c033ba3f54c336b/FLAG8b7372da2 14.81/9.31 [2019-03-28 12:02:50,433 INFO L363 CDTParser]: Successfully deleted /export/starexec/sandbox/tmp/ebc3a6f284bb4b688c033ba3f54c336b 14.81/9.31 [2019-03-28 12:02:50,445 INFO L297 ainManager$Toolchain]: ####################### [Toolchain 1] ####################### 14.81/9.31 [2019-03-28 12:02:50,446 INFO L131 ToolchainWalker]: Walking toolchain with 7 elements. 14.81/9.31 [2019-03-28 12:02:50,447 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator---------------------------- 14.81/9.31 [2019-03-28 12:02:50,447 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator... 14.81/9.31 [2019-03-28 12:02:50,451 INFO L276 PluginConnector]: CACSL2BoogieTranslator initialized 14.81/9.31 [2019-03-28 12:02:50,452 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 12:02:50" (1/1) ... 14.81/9.31 [2019-03-28 12:02:50,455 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@3ac1cf4f and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 12:02:50, skipping insertion in model container popout

output may be truncated. 'popout' for the full output.

job log

popout

actions

all output return to C 2019-03-28 11.48