details

property	value
status	complete
benchmark	HarrisLalNoriRajamani-SAS2010-Fig2_false-termination.c
ran by	Akihisa Yamada
cpu timeout	1200 seconds
wallclock timeout	300 seconds
memory limit	137438953472 bytes
execution host	n078.star.cs.uiowa.edu
space	SV-COMP_Termination_Category

run statistics

property	value
solver	UltimateAutomizer2019
configuration	default
runtime (wallclock)	6.81379 seconds
cpu usage	11.5577
user time	11.1296
system time	0.42819
max virtual memory	6.029664E7
max residence set size	371516.0

stage attributes

key	value
starexec-result	NO

output

11.50/6.81 NO 11.50/6.81 11.50/6.81 Ultimate: Cannot open display: 11.50/6.81 This is Ultimate 0.1.24-8dc7c08-m 11.50/6.81 [2019-03-28 11:59:33,238 INFO L170 SettingsManager]: Resetting all preferences to default values... 11.50/6.81 [2019-03-28 11:59:33,240 INFO L174 SettingsManager]: Resetting UltimateCore preferences to default values 11.50/6.81 [2019-03-28 11:59:33,252 INFO L177 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,252 INFO L174 SettingsManager]: Resetting Boogie Preprocessor preferences to default values 11.50/6.81 [2019-03-28 11:59:33,253 INFO L174 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values 11.50/6.81 [2019-03-28 11:59:33,254 INFO L174 SettingsManager]: Resetting Abstract Interpretation preferences to default values 11.50/6.81 [2019-03-28 11:59:33,255 INFO L174 SettingsManager]: Resetting LassoRanker preferences to default values 11.50/6.81 [2019-03-28 11:59:33,257 INFO L174 SettingsManager]: Resetting Reaching Definitions preferences to default values 11.50/6.81 [2019-03-28 11:59:33,258 INFO L174 SettingsManager]: Resetting SyntaxChecker preferences to default values 11.50/6.81 [2019-03-28 11:59:33,258 INFO L177 SettingsManager]: Büchi Program Product provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,259 INFO L174 SettingsManager]: Resetting LTL2Aut preferences to default values 11.50/6.81 [2019-03-28 11:59:33,260 INFO L174 SettingsManager]: Resetting PEA to Boogie preferences to default values 11.50/6.81 [2019-03-28 11:59:33,260 INFO L174 SettingsManager]: Resetting BlockEncodingV2 preferences to default values 11.50/6.81 [2019-03-28 11:59:33,261 INFO L174 SettingsManager]: Resetting ChcToBoogie preferences to default values 11.50/6.81 [2019-03-28 11:59:33,262 INFO L174 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values 11.50/6.81 [2019-03-28 11:59:33,263 INFO L174 SettingsManager]: Resetting BuchiAutomizer preferences to default values 11.50/6.81 [2019-03-28 11:59:33,265 INFO L174 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values 11.50/6.81 [2019-03-28 11:59:33,267 INFO L174 SettingsManager]: Resetting CodeCheck preferences to default values 11.50/6.81 [2019-03-28 11:59:33,268 INFO L174 SettingsManager]: Resetting InvariantSynthesis preferences to default values 11.50/6.81 [2019-03-28 11:59:33,269 INFO L174 SettingsManager]: Resetting RCFGBuilder preferences to default values 11.50/6.81 [2019-03-28 11:59:33,270 INFO L174 SettingsManager]: Resetting TraceAbstraction preferences to default values 11.50/6.81 [2019-03-28 11:59:33,272 INFO L177 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,272 INFO L177 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,273 INFO L174 SettingsManager]: Resetting TreeAutomizer preferences to default values 11.50/6.81 [2019-03-28 11:59:33,273 INFO L174 SettingsManager]: Resetting IcfgToChc preferences to default values 11.50/6.81 [2019-03-28 11:59:33,274 INFO L174 SettingsManager]: Resetting IcfgTransformer preferences to default values 11.50/6.81 [2019-03-28 11:59:33,275 INFO L177 SettingsManager]: ReqToTest provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,275 INFO L174 SettingsManager]: Resetting Boogie Printer preferences to default values 11.50/6.81 [2019-03-28 11:59:33,276 INFO L174 SettingsManager]: Resetting ChcSmtPrinter preferences to default values 11.50/6.81 [2019-03-28 11:59:33,276 INFO L174 SettingsManager]: Resetting ReqPrinter preferences to default values 11.50/6.81 [2019-03-28 11:59:33,277 INFO L174 SettingsManager]: Resetting Witness Printer preferences to default values 11.50/6.81 [2019-03-28 11:59:33,278 INFO L177 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,278 INFO L174 SettingsManager]: Resetting CDTParser preferences to default values 11.50/6.81 [2019-03-28 11:59:33,279 INFO L177 SettingsManager]: AutomataScriptParser provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,279 INFO L177 SettingsManager]: ReqParser provides no preferences, ignoring... 11.50/6.81 [2019-03-28 11:59:33,279 INFO L174 SettingsManager]: Resetting SmtParser preferences to default values 11.50/6.81 [2019-03-28 11:59:33,280 INFO L174 SettingsManager]: Resetting Witness Parser preferences to default values 11.50/6.81 [2019-03-28 11:59:33,281 INFO L181 SettingsManager]: Finished resetting all preferences to default values... 11.50/6.81 [2019-03-28 11:59:33,281 INFO L98 SettingsManager]: Beginning loading settings from /export/starexec/sandbox2/solver/bin/./../termcomp2017.epf 11.50/6.81 [2019-03-28 11:59:33,295 INFO L110 SettingsManager]: Loading preferences was successful 11.50/6.81 [2019-03-28 11:59:33,295 INFO L112 SettingsManager]: Preferences different from defaults after loading the file: 11.50/6.81 [2019-03-28 11:59:33,296 INFO L131 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults: 11.50/6.81 [2019-03-28 11:59:33,297 INFO L133 SettingsManager]: * Rewrite not-equals=true 11.50/6.81 [2019-03-28 11:59:33,297 INFO L133 SettingsManager]: * Create parallel compositions if possible=false 11.50/6.81 [2019-03-28 11:59:33,297 INFO L133 SettingsManager]: * Minimize states using LBE with the strategy=SINGLE 11.50/6.81 [2019-03-28 11:59:33,297 INFO L133 SettingsManager]: * Use SBE=true 11.50/6.81 [2019-03-28 11:59:33,297 INFO L131 SettingsManager]: Preferences of BuchiAutomizer differ from their defaults: 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Use old map elimination=false 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Use external solver (rank synthesis)=false 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Buchi interpolant automaton construction strategy=DANDELION 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Use only trivial implications for array writes=true 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Rank analysis=LINEAR_WITH_GUESSES 11.50/6.81 [2019-03-28 11:59:33,298 INFO L133 SettingsManager]: * Construct termination proof for TermComp=true 11.50/6.81 [2019-03-28 11:59:33,299 INFO L133 SettingsManager]: * Command for external solver (GNTA synthesis)=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:12000 11.50/6.81 [2019-03-28 11:59:33,299 INFO L131 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults: 11.50/6.81 [2019-03-28 11:59:33,299 INFO L133 SettingsManager]: * Check unreachability of error function in SV-COMP mode=false 11.50/6.81 [2019-03-28 11:59:33,299 INFO L133 SettingsManager]: * Check division by zero=IGNORE 11.50/6.81 [2019-03-28 11:59:33,299 INFO L133 SettingsManager]: * Check if freed pointer was valid=false 11.50/6.81 [2019-03-28 11:59:33,299 INFO L133 SettingsManager]: * Assume nondeterminstic values are in range=false 11.50/6.81 [2019-03-28 11:59:33,300 INFO L133 SettingsManager]: * How to treat unsigned ints differently from normal ones=IGNORE 11.50/6.81 [2019-03-28 11:59:33,300 INFO L131 SettingsManager]: Preferences of RCFGBuilder differ from their defaults: 11.50/6.81 [2019-03-28 11:59:33,300 INFO L133 SettingsManager]: * Size of a code block=SequenceOfStatements 11.50/6.81 [2019-03-28 11:59:33,300 INFO L133 SettingsManager]: * To the following directory=/home/matthias/ultimate/dump 11.50/6.81 [2019-03-28 11:59:33,300 INFO L133 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 11.50/6.81 [2019-03-28 11:59:33,301 INFO L131 SettingsManager]: Preferences of TraceAbstraction differ from their defaults: 11.50/6.81 [2019-03-28 11:59:33,301 INFO L133 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles 11.50/6.81 [2019-03-28 11:59:33,301 INFO L133 SettingsManager]: * Trace refinement strategy=CAMEL 11.50/6.81 [2019-03-28 11:59:33,301 INFO L133 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true 11.50/6.81 [2019-03-28 11:59:33,327 INFO L81 nceAwareModelManager]: Repository-Root is: /tmp 11.50/6.81 [2019-03-28 11:59:33,342 INFO L259 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized 11.50/6.81 [2019-03-28 11:59:33,346 INFO L215 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected. 11.50/6.81 [2019-03-28 11:59:33,347 INFO L271 PluginConnector]: Initializing CDTParser... 11.50/6.81 [2019-03-28 11:59:33,348 INFO L276 PluginConnector]: CDTParser initialized 11.50/6.81 [2019-03-28 11:59:33,349 INFO L430 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /export/starexec/sandbox2/benchmark/theBenchmark.c 11.50/6.81 [2019-03-28 11:59:33,437 INFO L221 CDTParser]: Created temporary CDT project at /export/starexec/sandbox2/tmp/acd70dfa18b145c5a31f21172cb64670/FLAG1c6c18f29 11.50/6.81 [2019-03-28 11:59:33,950 INFO L307 CDTParser]: Found 1 translation units. 11.50/6.81 [2019-03-28 11:59:33,951 INFO L161 CDTParser]: Scanning /export/starexec/sandbox2/benchmark/theBenchmark.c 11.50/6.81 [2019-03-28 11:59:33,958 INFO L355 CDTParser]: About to delete temporary CDT project at /export/starexec/sandbox2/tmp/acd70dfa18b145c5a31f21172cb64670/FLAG1c6c18f29 11.50/6.81 [2019-03-28 11:59:34,358 INFO L363 CDTParser]: Successfully deleted /export/starexec/sandbox2/tmp/acd70dfa18b145c5a31f21172cb64670 11.50/6.81 [2019-03-28 11:59:34,369 INFO L297 ainManager$Toolchain]: ####################### [Toolchain 1] ####################### 11.50/6.81 [2019-03-28 11:59:34,371 INFO L131 ToolchainWalker]: Walking toolchain with 7 elements. 11.50/6.81 [2019-03-28 11:59:34,372 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator---------------------------- 11.50/6.81 [2019-03-28 11:59:34,372 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator... 11.50/6.81 [2019-03-28 11:59:34,376 INFO L276 PluginConnector]: CACSL2BoogieTranslator initialized 11.50/6.81 [2019-03-28 11:59:34,377 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:59:34" (1/1) ... 11.50/6.81 [2019-03-28 11:59:34,380 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@4d3d9c34 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:59:34, skipping insertion in model container 11.50/6.81 [2019-03-28 11:59:34,380 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:59:34" (1/1) ... 11.50/6.81 [2019-03-28 11:59:34,388 INFO L145 MainTranslator]: Starting translation in SV-COMP mode 11.50/6.81 [2019-03-28 11:59:34,407 INFO L176 MainTranslator]: Built tables and reachable declarations 11.50/6.81 [2019-03-28 11:59:34,567 INFO L206 PostProcessor]: Analyzing one entry point: main 11.50/6.81 [2019-03-28 11:59:34,571 INFO L191 MainTranslator]: Completed pre-run 11.50/6.81 [2019-03-28 11:59:34,590 INFO L206 PostProcessor]: Analyzing one entry point: main 11.50/6.81 [2019-03-28 11:59:34,604 INFO L195 MainTranslator]: Completed translation 11.50/6.81 [2019-03-28 11:59:34,605 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:59:34 WrapperNode 11.50/6.81 [2019-03-28 11:59:34,605 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator---------------------------- 11.50/6.81 [2019-03-28 11:59:34,606 INFO L113 PluginConnector]: ------------------------Boogie Procedure Inliner---------------------------- popout

output may be truncated. 'popout' for the full output.

job log

popout

actions

all output return to C 2019-03-28 11.48