details

property	value
status	complete
benchmark	BradleyMannaSipma-CAV2005-Fig1-modified_false-termination.c
ran by	Akihisa Yamada
cpu timeout	1200 seconds
wallclock timeout	300 seconds
memory limit	137438953472 bytes
execution host	n140.star.cs.uiowa.edu
space	SV-COMP_Termination_Category

run statistics

property	value
solver	UltimateAutomizer2019
configuration	default
runtime (wallclock)	5.68782 seconds
cpu usage	11.6757
user time	11.2128
system time	0.462838
max virtual memory	6.03656E7
max residence set size	381464.0

stage attributes

key	value
starexec-result	NO

output

11.62/5.68 NO 11.62/5.68 11.62/5.68 Ultimate: Cannot open display: 11.62/5.68 This is Ultimate 0.1.24-8dc7c08-m 11.62/5.68 [2019-03-28 11:57:14,689 INFO L170 SettingsManager]: Resetting all preferences to default values... 11.62/5.68 [2019-03-28 11:57:14,691 INFO L174 SettingsManager]: Resetting UltimateCore preferences to default values 11.62/5.68 [2019-03-28 11:57:14,702 INFO L177 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,702 INFO L174 SettingsManager]: Resetting Boogie Preprocessor preferences to default values 11.62/5.68 [2019-03-28 11:57:14,703 INFO L174 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values 11.62/5.68 [2019-03-28 11:57:14,704 INFO L174 SettingsManager]: Resetting Abstract Interpretation preferences to default values 11.62/5.68 [2019-03-28 11:57:14,706 INFO L174 SettingsManager]: Resetting LassoRanker preferences to default values 11.62/5.68 [2019-03-28 11:57:14,707 INFO L174 SettingsManager]: Resetting Reaching Definitions preferences to default values 11.62/5.68 [2019-03-28 11:57:14,709 INFO L174 SettingsManager]: Resetting SyntaxChecker preferences to default values 11.62/5.68 [2019-03-28 11:57:14,710 INFO L177 SettingsManager]: Büchi Program Product provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,710 INFO L174 SettingsManager]: Resetting LTL2Aut preferences to default values 11.62/5.68 [2019-03-28 11:57:14,711 INFO L174 SettingsManager]: Resetting PEA to Boogie preferences to default values 11.62/5.68 [2019-03-28 11:57:14,712 INFO L174 SettingsManager]: Resetting BlockEncodingV2 preferences to default values 11.62/5.68 [2019-03-28 11:57:14,713 INFO L174 SettingsManager]: Resetting ChcToBoogie preferences to default values 11.62/5.68 [2019-03-28 11:57:14,714 INFO L174 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values 11.62/5.68 [2019-03-28 11:57:14,714 INFO L174 SettingsManager]: Resetting BuchiAutomizer preferences to default values 11.62/5.68 [2019-03-28 11:57:14,716 INFO L174 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values 11.62/5.68 [2019-03-28 11:57:14,718 INFO L174 SettingsManager]: Resetting CodeCheck preferences to default values 11.62/5.68 [2019-03-28 11:57:14,719 INFO L174 SettingsManager]: Resetting InvariantSynthesis preferences to default values 11.62/5.68 [2019-03-28 11:57:14,720 INFO L174 SettingsManager]: Resetting RCFGBuilder preferences to default values 11.62/5.68 [2019-03-28 11:57:14,721 INFO L174 SettingsManager]: Resetting TraceAbstraction preferences to default values 11.62/5.68 [2019-03-28 11:57:14,723 INFO L177 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,723 INFO L177 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,724 INFO L174 SettingsManager]: Resetting TreeAutomizer preferences to default values 11.62/5.68 [2019-03-28 11:57:14,724 INFO L174 SettingsManager]: Resetting IcfgToChc preferences to default values 11.62/5.68 [2019-03-28 11:57:14,725 INFO L174 SettingsManager]: Resetting IcfgTransformer preferences to default values 11.62/5.68 [2019-03-28 11:57:14,726 INFO L177 SettingsManager]: ReqToTest provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,726 INFO L174 SettingsManager]: Resetting Boogie Printer preferences to default values 11.62/5.68 [2019-03-28 11:57:14,727 INFO L174 SettingsManager]: Resetting ChcSmtPrinter preferences to default values 11.62/5.68 [2019-03-28 11:57:14,727 INFO L174 SettingsManager]: Resetting ReqPrinter preferences to default values 11.62/5.68 [2019-03-28 11:57:14,728 INFO L174 SettingsManager]: Resetting Witness Printer preferences to default values 11.62/5.68 [2019-03-28 11:57:14,729 INFO L177 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,729 INFO L174 SettingsManager]: Resetting CDTParser preferences to default values 11.62/5.68 [2019-03-28 11:57:14,730 INFO L177 SettingsManager]: AutomataScriptParser provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,730 INFO L177 SettingsManager]: ReqParser provides no preferences, ignoring... 11.62/5.68 [2019-03-28 11:57:14,730 INFO L174 SettingsManager]: Resetting SmtParser preferences to default values 11.62/5.68 [2019-03-28 11:57:14,731 INFO L174 SettingsManager]: Resetting Witness Parser preferences to default values 11.62/5.68 [2019-03-28 11:57:14,732 INFO L181 SettingsManager]: Finished resetting all preferences to default values... 11.62/5.68 [2019-03-28 11:57:14,732 INFO L98 SettingsManager]: Beginning loading settings from /export/starexec/sandbox/solver/bin/./../termcomp2017.epf 11.62/5.68 [2019-03-28 11:57:14,747 INFO L110 SettingsManager]: Loading preferences was successful 11.62/5.68 [2019-03-28 11:57:14,747 INFO L112 SettingsManager]: Preferences different from defaults after loading the file: 11.62/5.68 [2019-03-28 11:57:14,748 INFO L131 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults: 11.62/5.68 [2019-03-28 11:57:14,749 INFO L133 SettingsManager]: * Rewrite not-equals=true 11.62/5.68 [2019-03-28 11:57:14,749 INFO L133 SettingsManager]: * Create parallel compositions if possible=false 11.62/5.68 [2019-03-28 11:57:14,749 INFO L133 SettingsManager]: * Minimize states using LBE with the strategy=SINGLE 11.62/5.68 [2019-03-28 11:57:14,749 INFO L133 SettingsManager]: * Use SBE=true 11.62/5.68 [2019-03-28 11:57:14,749 INFO L131 SettingsManager]: Preferences of BuchiAutomizer differ from their defaults: 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Use old map elimination=false 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Use external solver (rank synthesis)=false 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Buchi interpolant automaton construction strategy=DANDELION 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Use only trivial implications for array writes=true 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Rank analysis=LINEAR_WITH_GUESSES 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Construct termination proof for TermComp=true 11.62/5.68 [2019-03-28 11:57:14,750 INFO L133 SettingsManager]: * Command for external solver (GNTA synthesis)=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:12000 11.62/5.68 [2019-03-28 11:57:14,751 INFO L131 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults: 11.62/5.68 [2019-03-28 11:57:14,751 INFO L133 SettingsManager]: * Check unreachability of error function in SV-COMP mode=false 11.62/5.68 [2019-03-28 11:57:14,751 INFO L133 SettingsManager]: * Check division by zero=IGNORE 11.62/5.68 [2019-03-28 11:57:14,751 INFO L133 SettingsManager]: * Check if freed pointer was valid=false 11.62/5.68 [2019-03-28 11:57:14,751 INFO L133 SettingsManager]: * Assume nondeterminstic values are in range=false 11.62/5.68 [2019-03-28 11:57:14,752 INFO L133 SettingsManager]: * How to treat unsigned ints differently from normal ones=IGNORE 11.62/5.68 [2019-03-28 11:57:14,752 INFO L131 SettingsManager]: Preferences of RCFGBuilder differ from their defaults: 11.62/5.68 [2019-03-28 11:57:14,752 INFO L133 SettingsManager]: * Size of a code block=SequenceOfStatements 11.62/5.68 [2019-03-28 11:57:14,752 INFO L133 SettingsManager]: * To the following directory=/home/matthias/ultimate/dump 11.62/5.68 [2019-03-28 11:57:14,752 INFO L133 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 11.62/5.68 [2019-03-28 11:57:14,752 INFO L131 SettingsManager]: Preferences of TraceAbstraction differ from their defaults: 11.62/5.68 [2019-03-28 11:57:14,753 INFO L133 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles 11.62/5.68 [2019-03-28 11:57:14,753 INFO L133 SettingsManager]: * Trace refinement strategy=CAMEL 11.62/5.68 [2019-03-28 11:57:14,753 INFO L133 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true 11.62/5.68 [2019-03-28 11:57:14,778 INFO L81 nceAwareModelManager]: Repository-Root is: /tmp 11.62/5.68 [2019-03-28 11:57:14,791 INFO L259 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized 11.62/5.68 [2019-03-28 11:57:14,795 INFO L215 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected. 11.62/5.68 [2019-03-28 11:57:14,796 INFO L271 PluginConnector]: Initializing CDTParser... 11.62/5.68 [2019-03-28 11:57:14,796 INFO L276 PluginConnector]: CDTParser initialized 11.62/5.68 [2019-03-28 11:57:14,797 INFO L430 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /export/starexec/sandbox/benchmark/theBenchmark.c 11.62/5.68 [2019-03-28 11:57:14,859 INFO L221 CDTParser]: Created temporary CDT project at /export/starexec/sandbox/tmp/6e6cd129343544bcb2b0e93f53942dc0/FLAGc473b007c 11.62/5.68 [2019-03-28 11:57:15,204 INFO L307 CDTParser]: Found 1 translation units. 11.62/5.68 [2019-03-28 11:57:15,205 INFO L161 CDTParser]: Scanning /export/starexec/sandbox/benchmark/theBenchmark.c 11.62/5.68 [2019-03-28 11:57:15,212 INFO L355 CDTParser]: About to delete temporary CDT project at /export/starexec/sandbox/tmp/6e6cd129343544bcb2b0e93f53942dc0/FLAGc473b007c 11.62/5.68 [2019-03-28 11:57:15,602 INFO L363 CDTParser]: Successfully deleted /export/starexec/sandbox/tmp/6e6cd129343544bcb2b0e93f53942dc0 11.62/5.68 [2019-03-28 11:57:15,614 INFO L297 ainManager$Toolchain]: ####################### [Toolchain 1] ####################### 11.62/5.68 [2019-03-28 11:57:15,616 INFO L131 ToolchainWalker]: Walking toolchain with 7 elements. 11.62/5.68 [2019-03-28 11:57:15,617 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator---------------------------- 11.62/5.68 [2019-03-28 11:57:15,617 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator... 11.62/5.68 [2019-03-28 11:57:15,621 INFO L276 PluginConnector]: CACSL2BoogieTranslator initialized 11.62/5.68 [2019-03-28 11:57:15,622 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:57:15" (1/1) ... 11.62/5.68 [2019-03-28 11:57:15,625 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@caa1dce and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:57:15, skipping insertion in model container 11.62/5.68 [2019-03-28 11:57:15,625 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:57:15" (1/1) ... 11.62/5.68 [2019-03-28 11:57:15,635 INFO L145 MainTranslator]: Starting translation in SV-COMP mode 11.62/5.68 [2019-03-28 11:57:15,653 INFO L176 MainTranslator]: Built tables and reachable declarations 11.62/5.68 [2019-03-28 11:57:15,813 INFO L206 PostProcessor]: Analyzing one entry point: main 11.62/5.68 [2019-03-28 11:57:15,817 INFO L191 MainTranslator]: Completed pre-run 11.62/5.68 [2019-03-28 11:57:15,834 INFO L206 PostProcessor]: Analyzing one entry point: main 11.62/5.68 [2019-03-28 11:57:15,907 INFO L195 MainTranslator]: Completed translation 11.62/5.68 [2019-03-28 11:57:15,907 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:57:15 WrapperNode 11.62/5.68 [2019-03-28 11:57:15,908 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator---------------------------- 11.62/5.68 [2019-03-28 11:57:15,909 INFO L113 PluginConnector]: ------------------------Boogie Procedure Inliner---------------------------- popout

output may be truncated. 'popout' for the full output.

job log

popout

actions

all output return to C 2019-03-28 11.48