details

property	value
status	complete
benchmark	HeizmannHoenickeLeikePodelski-ATVA2013-Fig6_true-termination.c
ran by	Akihisa Yamada
cpu timeout	1200 seconds
wallclock timeout	300 seconds
memory limit	137438953472 bytes
execution host	n074.star.cs.uiowa.edu
space	SV-COMP_Termination_Category

run statistics

property	value
solver	UltimateAutomizer2019
configuration	default
runtime (wallclock)	6.15639 seconds
cpu usage	13.6461
user time	13.1599
system time	0.486254
max virtual memory	6.0670204E7
max residence set size	395312.0

stage attributes

key	value
starexec-result	YES

output

13.60/6.15 YES 13.60/6.15 13.60/6.15 Ultimate: Cannot open display: 13.60/6.15 This is Ultimate 0.1.24-8dc7c08-m 13.60/6.15 [2019-03-28 11:53:45,442 INFO L170 SettingsManager]: Resetting all preferences to default values... 13.60/6.15 [2019-03-28 11:53:45,444 INFO L174 SettingsManager]: Resetting UltimateCore preferences to default values 13.60/6.15 [2019-03-28 11:53:45,456 INFO L177 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,456 INFO L174 SettingsManager]: Resetting Boogie Preprocessor preferences to default values 13.60/6.15 [2019-03-28 11:53:45,457 INFO L174 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values 13.60/6.15 [2019-03-28 11:53:45,458 INFO L174 SettingsManager]: Resetting Abstract Interpretation preferences to default values 13.60/6.15 [2019-03-28 11:53:45,460 INFO L174 SettingsManager]: Resetting LassoRanker preferences to default values 13.60/6.15 [2019-03-28 11:53:45,461 INFO L174 SettingsManager]: Resetting Reaching Definitions preferences to default values 13.60/6.15 [2019-03-28 11:53:45,462 INFO L174 SettingsManager]: Resetting SyntaxChecker preferences to default values 13.60/6.15 [2019-03-28 11:53:45,463 INFO L177 SettingsManager]: Büchi Program Product provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,463 INFO L174 SettingsManager]: Resetting LTL2Aut preferences to default values 13.60/6.15 [2019-03-28 11:53:45,464 INFO L174 SettingsManager]: Resetting PEA to Boogie preferences to default values 13.60/6.15 [2019-03-28 11:53:45,465 INFO L174 SettingsManager]: Resetting BlockEncodingV2 preferences to default values 13.60/6.15 [2019-03-28 11:53:45,466 INFO L174 SettingsManager]: Resetting ChcToBoogie preferences to default values 13.60/6.15 [2019-03-28 11:53:45,467 INFO L174 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values 13.60/6.15 [2019-03-28 11:53:45,468 INFO L174 SettingsManager]: Resetting BuchiAutomizer preferences to default values 13.60/6.15 [2019-03-28 11:53:45,469 INFO L174 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values 13.60/6.15 [2019-03-28 11:53:45,471 INFO L174 SettingsManager]: Resetting CodeCheck preferences to default values 13.60/6.15 [2019-03-28 11:53:45,473 INFO L174 SettingsManager]: Resetting InvariantSynthesis preferences to default values 13.60/6.15 [2019-03-28 11:53:45,474 INFO L174 SettingsManager]: Resetting RCFGBuilder preferences to default values 13.60/6.15 [2019-03-28 11:53:45,475 INFO L174 SettingsManager]: Resetting TraceAbstraction preferences to default values 13.60/6.15 [2019-03-28 11:53:45,477 INFO L177 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,478 INFO L177 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,478 INFO L174 SettingsManager]: Resetting TreeAutomizer preferences to default values 13.60/6.15 [2019-03-28 11:53:45,479 INFO L174 SettingsManager]: Resetting IcfgToChc preferences to default values 13.60/6.15 [2019-03-28 11:53:45,479 INFO L174 SettingsManager]: Resetting IcfgTransformer preferences to default values 13.60/6.15 [2019-03-28 11:53:45,480 INFO L177 SettingsManager]: ReqToTest provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,481 INFO L174 SettingsManager]: Resetting Boogie Printer preferences to default values 13.60/6.15 [2019-03-28 11:53:45,481 INFO L174 SettingsManager]: Resetting ChcSmtPrinter preferences to default values 13.60/6.15 [2019-03-28 11:53:45,482 INFO L174 SettingsManager]: Resetting ReqPrinter preferences to default values 13.60/6.15 [2019-03-28 11:53:45,483 INFO L174 SettingsManager]: Resetting Witness Printer preferences to default values 13.60/6.15 [2019-03-28 11:53:45,484 INFO L177 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,484 INFO L174 SettingsManager]: Resetting CDTParser preferences to default values 13.60/6.15 [2019-03-28 11:53:45,484 INFO L177 SettingsManager]: AutomataScriptParser provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,485 INFO L177 SettingsManager]: ReqParser provides no preferences, ignoring... 13.60/6.15 [2019-03-28 11:53:45,485 INFO L174 SettingsManager]: Resetting SmtParser preferences to default values 13.60/6.15 [2019-03-28 11:53:45,486 INFO L174 SettingsManager]: Resetting Witness Parser preferences to default values 13.60/6.15 [2019-03-28 11:53:45,486 INFO L181 SettingsManager]: Finished resetting all preferences to default values... 13.60/6.15 [2019-03-28 11:53:45,487 INFO L98 SettingsManager]: Beginning loading settings from /export/starexec/sandbox/solver/bin/./../termcomp2017.epf 13.60/6.15 [2019-03-28 11:53:45,502 INFO L110 SettingsManager]: Loading preferences was successful 13.60/6.15 [2019-03-28 11:53:45,502 INFO L112 SettingsManager]: Preferences different from defaults after loading the file: 13.60/6.15 [2019-03-28 11:53:45,503 INFO L131 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults: 13.60/6.15 [2019-03-28 11:53:45,503 INFO L133 SettingsManager]: * Rewrite not-equals=true 13.60/6.15 [2019-03-28 11:53:45,504 INFO L133 SettingsManager]: * Create parallel compositions if possible=false 13.60/6.15 [2019-03-28 11:53:45,504 INFO L133 SettingsManager]: * Minimize states using LBE with the strategy=SINGLE 13.60/6.15 [2019-03-28 11:53:45,504 INFO L133 SettingsManager]: * Use SBE=true 13.60/6.15 [2019-03-28 11:53:45,504 INFO L131 SettingsManager]: Preferences of BuchiAutomizer differ from their defaults: 13.60/6.15 [2019-03-28 11:53:45,504 INFO L133 SettingsManager]: * Use old map elimination=false 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Use external solver (rank synthesis)=false 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Buchi interpolant automaton construction strategy=DANDELION 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Use only trivial implications for array writes=true 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Rank analysis=LINEAR_WITH_GUESSES 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Construct termination proof for TermComp=true 13.60/6.15 [2019-03-28 11:53:45,505 INFO L133 SettingsManager]: * Command for external solver (GNTA synthesis)=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:12000 13.60/6.15 [2019-03-28 11:53:45,506 INFO L131 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults: 13.60/6.15 [2019-03-28 11:53:45,506 INFO L133 SettingsManager]: * Check unreachability of error function in SV-COMP mode=false 13.60/6.15 [2019-03-28 11:53:45,506 INFO L133 SettingsManager]: * Check division by zero=IGNORE 13.60/6.15 [2019-03-28 11:53:45,506 INFO L133 SettingsManager]: * Check if freed pointer was valid=false 13.60/6.15 [2019-03-28 11:53:45,506 INFO L133 SettingsManager]: * Assume nondeterminstic values are in range=false 13.60/6.15 [2019-03-28 11:53:45,507 INFO L133 SettingsManager]: * How to treat unsigned ints differently from normal ones=IGNORE 13.60/6.15 [2019-03-28 11:53:45,507 INFO L131 SettingsManager]: Preferences of RCFGBuilder differ from their defaults: 13.60/6.15 [2019-03-28 11:53:45,507 INFO L133 SettingsManager]: * Size of a code block=SequenceOfStatements 13.60/6.15 [2019-03-28 11:53:45,507 INFO L133 SettingsManager]: * To the following directory=/home/matthias/ultimate/dump 13.60/6.15 [2019-03-28 11:53:45,507 INFO L133 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 13.60/6.15 [2019-03-28 11:53:45,507 INFO L131 SettingsManager]: Preferences of TraceAbstraction differ from their defaults: 13.60/6.15 [2019-03-28 11:53:45,508 INFO L133 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles 13.60/6.15 [2019-03-28 11:53:45,508 INFO L133 SettingsManager]: * Trace refinement strategy=CAMEL 13.60/6.15 [2019-03-28 11:53:45,508 INFO L133 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true 13.60/6.15 [2019-03-28 11:53:45,534 INFO L81 nceAwareModelManager]: Repository-Root is: /tmp 13.60/6.15 [2019-03-28 11:53:45,548 INFO L259 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized 13.60/6.15 [2019-03-28 11:53:45,551 INFO L215 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected. 13.60/6.15 [2019-03-28 11:53:45,553 INFO L271 PluginConnector]: Initializing CDTParser... 13.60/6.15 [2019-03-28 11:53:45,553 INFO L276 PluginConnector]: CDTParser initialized 13.60/6.15 [2019-03-28 11:53:45,554 INFO L430 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /export/starexec/sandbox/benchmark/theBenchmark.c 13.60/6.15 [2019-03-28 11:53:45,616 INFO L221 CDTParser]: Created temporary CDT project at /export/starexec/sandbox/tmp/c595e8754b6a4e24a4663d0731ae2f49/FLAG3732b20ff 13.60/6.15 [2019-03-28 11:53:45,955 INFO L307 CDTParser]: Found 1 translation units. 13.60/6.15 [2019-03-28 11:53:45,956 INFO L161 CDTParser]: Scanning /export/starexec/sandbox/benchmark/theBenchmark.c 13.60/6.15 [2019-03-28 11:53:45,962 INFO L355 CDTParser]: About to delete temporary CDT project at /export/starexec/sandbox/tmp/c595e8754b6a4e24a4663d0731ae2f49/FLAG3732b20ff 13.60/6.15 [2019-03-28 11:53:46,355 INFO L363 CDTParser]: Successfully deleted /export/starexec/sandbox/tmp/c595e8754b6a4e24a4663d0731ae2f49 13.60/6.15 [2019-03-28 11:53:46,366 INFO L297 ainManager$Toolchain]: ####################### [Toolchain 1] ####################### 13.60/6.15 [2019-03-28 11:53:46,368 INFO L131 ToolchainWalker]: Walking toolchain with 7 elements. 13.60/6.15 [2019-03-28 11:53:46,369 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator---------------------------- 13.60/6.15 [2019-03-28 11:53:46,369 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator... 13.60/6.15 [2019-03-28 11:53:46,373 INFO L276 PluginConnector]: CACSL2BoogieTranslator initialized 13.60/6.15 [2019-03-28 11:53:46,374 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:53:46" (1/1) ... 13.60/6.15 [2019-03-28 11:53:46,377 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@5debbf32 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:53:46, skipping insertion in model container 13.60/6.15 [2019-03-28 11:53:46,377 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 11:53:46" (1/1) ... 13.60/6.15 [2019-03-28 11:53:46,385 INFO L145 MainTranslator]: Starting translation in SV-COMP mode 13.60/6.15 [2019-03-28 11:53:46,402 INFO L176 MainTranslator]: Built tables and reachable declarations 13.60/6.15 [2019-03-28 11:53:46,556 INFO L206 PostProcessor]: Analyzing one entry point: main 13.60/6.15 [2019-03-28 11:53:46,561 INFO L191 MainTranslator]: Completed pre-run 13.60/6.15 [2019-03-28 11:53:46,577 INFO L206 PostProcessor]: Analyzing one entry point: main 13.60/6.15 [2019-03-28 11:53:46,591 INFO L195 MainTranslator]: Completed translation 13.60/6.15 [2019-03-28 11:53:46,592 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 11:53:46 WrapperNode 13.60/6.15 [2019-03-28 11:53:46,592 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator---------------------------- 13.60/6.15 [2019-03-28 11:53:46,593 INFO L113 PluginConnector]: ------------------------Boogie Procedure Inliner---------------------------- popout

output may be truncated. 'popout' for the full output.

job log

popout

actions

all output return to C 2019-03-28 11.48