11.43/5.50 NO 11.43/5.50 11.43/5.50 Ultimate: Cannot open display: 11.43/5.50 This is Ultimate 0.1.24-8dc7c08-m 11.43/5.50 [2019-03-28 22:51:44,867 INFO L170 SettingsManager]: Resetting all preferences to default values... 11.43/5.50 [2019-03-28 22:51:44,869 INFO L174 SettingsManager]: Resetting UltimateCore preferences to default values 11.43/5.50 [2019-03-28 22:51:44,880 INFO L177 SettingsManager]: Ultimate Commandline Interface provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,881 INFO L174 SettingsManager]: Resetting Boogie Preprocessor preferences to default values 11.43/5.50 [2019-03-28 22:51:44,881 INFO L174 SettingsManager]: Resetting Boogie Procedure Inliner preferences to default values 11.43/5.50 [2019-03-28 22:51:44,883 INFO L174 SettingsManager]: Resetting Abstract Interpretation preferences to default values 11.43/5.50 [2019-03-28 22:51:44,884 INFO L174 SettingsManager]: Resetting LassoRanker preferences to default values 11.43/5.50 [2019-03-28 22:51:44,886 INFO L174 SettingsManager]: Resetting Reaching Definitions preferences to default values 11.43/5.50 [2019-03-28 22:51:44,886 INFO L174 SettingsManager]: Resetting SyntaxChecker preferences to default values 11.43/5.50 [2019-03-28 22:51:44,887 INFO L177 SettingsManager]: Büchi Program Product provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,888 INFO L174 SettingsManager]: Resetting LTL2Aut preferences to default values 11.43/5.50 [2019-03-28 22:51:44,888 INFO L174 SettingsManager]: Resetting PEA to Boogie preferences to default values 11.43/5.50 [2019-03-28 22:51:44,889 INFO L174 SettingsManager]: Resetting BlockEncodingV2 preferences to default values 11.43/5.50 [2019-03-28 22:51:44,891 INFO L174 SettingsManager]: Resetting ChcToBoogie preferences to default values 11.43/5.50 [2019-03-28 22:51:44,891 INFO L174 SettingsManager]: Resetting AutomataScriptInterpreter preferences to default values 11.43/5.50 [2019-03-28 22:51:44,892 INFO L174 SettingsManager]: Resetting BuchiAutomizer preferences to default values 11.43/5.50 [2019-03-28 22:51:44,894 INFO L174 SettingsManager]: Resetting CACSL2BoogieTranslator preferences to default values 11.43/5.50 [2019-03-28 22:51:44,896 INFO L174 SettingsManager]: Resetting CodeCheck preferences to default values 11.43/5.50 [2019-03-28 22:51:44,897 INFO L174 SettingsManager]: Resetting InvariantSynthesis preferences to default values 11.43/5.50 [2019-03-28 22:51:44,898 INFO L174 SettingsManager]: Resetting RCFGBuilder preferences to default values 11.43/5.50 [2019-03-28 22:51:44,899 INFO L174 SettingsManager]: Resetting TraceAbstraction preferences to default values 11.43/5.50 [2019-03-28 22:51:44,901 INFO L177 SettingsManager]: TraceAbstractionConcurrent provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,901 INFO L177 SettingsManager]: TraceAbstractionWithAFAs provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,902 INFO L174 SettingsManager]: Resetting TreeAutomizer preferences to default values 11.43/5.50 [2019-03-28 22:51:44,902 INFO L174 SettingsManager]: Resetting IcfgToChc preferences to default values 11.43/5.50 [2019-03-28 22:51:44,903 INFO L174 SettingsManager]: Resetting IcfgTransformer preferences to default values 11.43/5.50 [2019-03-28 22:51:44,904 INFO L177 SettingsManager]: ReqToTest provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,904 INFO L174 SettingsManager]: Resetting Boogie Printer preferences to default values 11.43/5.50 [2019-03-28 22:51:44,905 INFO L174 SettingsManager]: Resetting ChcSmtPrinter preferences to default values 11.43/5.50 [2019-03-28 22:51:44,905 INFO L174 SettingsManager]: Resetting ReqPrinter preferences to default values 11.43/5.50 [2019-03-28 22:51:44,906 INFO L174 SettingsManager]: Resetting Witness Printer preferences to default values 11.43/5.50 [2019-03-28 22:51:44,907 INFO L177 SettingsManager]: Boogie PL CUP Parser provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,907 INFO L174 SettingsManager]: Resetting CDTParser preferences to default values 11.43/5.50 [2019-03-28 22:51:44,908 INFO L177 SettingsManager]: AutomataScriptParser provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,908 INFO L177 SettingsManager]: ReqParser provides no preferences, ignoring... 11.43/5.50 [2019-03-28 22:51:44,908 INFO L174 SettingsManager]: Resetting SmtParser preferences to default values 11.43/5.50 [2019-03-28 22:51:44,909 INFO L174 SettingsManager]: Resetting Witness Parser preferences to default values 11.43/5.50 [2019-03-28 22:51:44,910 INFO L181 SettingsManager]: Finished resetting all preferences to default values... 11.43/5.50 [2019-03-28 22:51:44,910 INFO L98 SettingsManager]: Beginning loading settings from /export/starexec/sandbox/solver/bin/./../termcomp2017.epf 11.43/5.50 [2019-03-28 22:51:44,925 INFO L110 SettingsManager]: Loading preferences was successful 11.43/5.50 [2019-03-28 22:51:44,925 INFO L112 SettingsManager]: Preferences different from defaults after loading the file: 11.43/5.50 [2019-03-28 22:51:44,926 INFO L131 SettingsManager]: Preferences of BlockEncodingV2 differ from their defaults: 11.43/5.50 [2019-03-28 22:51:44,926 INFO L133 SettingsManager]: * Rewrite not-equals=true 11.43/5.50 [2019-03-28 22:51:44,926 INFO L133 SettingsManager]: * Create parallel compositions if possible=false 11.43/5.50 [2019-03-28 22:51:44,926 INFO L133 SettingsManager]: * Minimize states using LBE with the strategy=SINGLE 11.43/5.50 [2019-03-28 22:51:44,927 INFO L133 SettingsManager]: * Use SBE=true 11.43/5.50 [2019-03-28 22:51:44,927 INFO L131 SettingsManager]: Preferences of BuchiAutomizer differ from their defaults: 11.43/5.50 [2019-03-28 22:51:44,927 INFO L133 SettingsManager]: * Use old map elimination=false 11.43/5.50 [2019-03-28 22:51:44,927 INFO L133 SettingsManager]: * Use external solver (rank synthesis)=false 11.43/5.50 [2019-03-28 22:51:44,927 INFO L133 SettingsManager]: * Buchi interpolant automaton construction strategy=DANDELION 11.43/5.50 [2019-03-28 22:51:44,927 INFO L133 SettingsManager]: * Use only trivial implications for array writes=true 11.43/5.50 [2019-03-28 22:51:44,928 INFO L133 SettingsManager]: * Rank analysis=LINEAR_WITH_GUESSES 11.43/5.50 [2019-03-28 22:51:44,928 INFO L133 SettingsManager]: * Construct termination proof for TermComp=true 11.43/5.50 [2019-03-28 22:51:44,928 INFO L133 SettingsManager]: * Command for external solver (GNTA synthesis)=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:12000 11.43/5.50 [2019-03-28 22:51:44,928 INFO L131 SettingsManager]: Preferences of CACSL2BoogieTranslator differ from their defaults: 11.43/5.50 [2019-03-28 22:51:44,928 INFO L133 SettingsManager]: * Check unreachability of error function in SV-COMP mode=false 11.43/5.50 [2019-03-28 22:51:44,928 INFO L133 SettingsManager]: * Check division by zero=IGNORE 11.43/5.50 [2019-03-28 22:51:44,929 INFO L133 SettingsManager]: * Check if freed pointer was valid=false 11.43/5.50 [2019-03-28 22:51:44,929 INFO L133 SettingsManager]: * Assume nondeterminstic values are in range=false 11.43/5.50 [2019-03-28 22:51:44,929 INFO L133 SettingsManager]: * How to treat unsigned ints differently from normal ones=IGNORE 11.43/5.50 [2019-03-28 22:51:44,929 INFO L131 SettingsManager]: Preferences of RCFGBuilder differ from their defaults: 11.43/5.50 [2019-03-28 22:51:44,929 INFO L133 SettingsManager]: * Size of a code block=SequenceOfStatements 11.43/5.50 [2019-03-28 22:51:44,930 INFO L133 SettingsManager]: * To the following directory=/home/matthias/ultimate/dump 11.43/5.50 [2019-03-28 22:51:44,930 INFO L133 SettingsManager]: * Command for external solver=z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 11.43/5.50 [2019-03-28 22:51:44,930 INFO L131 SettingsManager]: Preferences of TraceAbstraction differ from their defaults: 11.43/5.50 [2019-03-28 22:51:44,930 INFO L133 SettingsManager]: * Positions where we compute the Hoare Annotation=LoopsAndPotentialCycles 11.43/5.50 [2019-03-28 22:51:44,930 INFO L133 SettingsManager]: * Trace refinement strategy=CAMEL 11.43/5.50 [2019-03-28 22:51:44,930 INFO L133 SettingsManager]: * Compute Hoare Annotation of negated interpolant automaton, abstraction and CFG=true 11.43/5.50 [2019-03-28 22:51:44,956 INFO L81 nceAwareModelManager]: Repository-Root is: /tmp 11.43/5.50 [2019-03-28 22:51:44,969 INFO L259 ainManager$Toolchain]: [Toolchain 1]: Applicable parser(s) successfully (re)initialized 11.43/5.50 [2019-03-28 22:51:44,973 INFO L215 ainManager$Toolchain]: [Toolchain 1]: Toolchain selected. 11.43/5.50 [2019-03-28 22:51:44,974 INFO L271 PluginConnector]: Initializing CDTParser... 11.43/5.50 [2019-03-28 22:51:44,974 INFO L276 PluginConnector]: CDTParser initialized 11.43/5.50 [2019-03-28 22:51:44,975 INFO L430 ainManager$Toolchain]: [Toolchain 1]: Parsing single file: /export/starexec/sandbox/benchmark/theBenchmark.c 11.43/5.50 [2019-03-28 22:51:45,111 INFO L221 CDTParser]: Created temporary CDT project at /export/starexec/sandbox/tmp/026c03b9a3b74a1894fa07820f974207/FLAG4022e9a97 11.43/5.50 [2019-03-28 22:51:45,446 INFO L307 CDTParser]: Found 1 translation units. 11.43/5.50 [2019-03-28 22:51:45,447 INFO L161 CDTParser]: Scanning /export/starexec/sandbox/benchmark/theBenchmark.c 11.43/5.50 [2019-03-28 22:51:45,453 INFO L355 CDTParser]: About to delete temporary CDT project at /export/starexec/sandbox/tmp/026c03b9a3b74a1894fa07820f974207/FLAG4022e9a97 11.43/5.50 [2019-03-28 22:51:45,863 INFO L363 CDTParser]: Successfully deleted /export/starexec/sandbox/tmp/026c03b9a3b74a1894fa07820f974207 11.43/5.50 [2019-03-28 22:51:45,875 INFO L297 ainManager$Toolchain]: ####################### [Toolchain 1] ####################### 11.43/5.50 [2019-03-28 22:51:45,876 INFO L131 ToolchainWalker]: Walking toolchain with 7 elements. 11.43/5.50 [2019-03-28 22:51:45,877 INFO L113 PluginConnector]: ------------------------CACSL2BoogieTranslator---------------------------- 11.43/5.50 [2019-03-28 22:51:45,878 INFO L271 PluginConnector]: Initializing CACSL2BoogieTranslator... 11.43/5.50 [2019-03-28 22:51:45,881 INFO L276 PluginConnector]: CACSL2BoogieTranslator initialized 11.43/5.50 [2019-03-28 22:51:45,882 INFO L185 PluginConnector]: Executing the observer ACSLObjectContainerObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 10:51:45" (1/1) ... 11.43/5.50 [2019-03-28 22:51:45,886 INFO L205 PluginConnector]: Invalid model from CACSL2BoogieTranslator for observer de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator.ACSLObjectContainerObserver@796a4f8a and model type de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:45, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:45,886 INFO L185 PluginConnector]: Executing the observer CACSL2BoogieTranslatorObserver from plugin CACSL2BoogieTranslator for "CDTParser AST 28.03 10:51:45" (1/1) ... 11.43/5.50 [2019-03-28 22:51:45,894 INFO L145 MainTranslator]: Starting translation in SV-COMP mode 11.43/5.50 [2019-03-28 22:51:45,911 INFO L176 MainTranslator]: Built tables and reachable declarations 11.43/5.50 [2019-03-28 22:51:46,068 INFO L206 PostProcessor]: Analyzing one entry point: main 11.43/5.50 [2019-03-28 22:51:46,073 INFO L191 MainTranslator]: Completed pre-run 11.43/5.50 [2019-03-28 22:51:46,089 INFO L206 PostProcessor]: Analyzing one entry point: main 11.43/5.50 [2019-03-28 22:51:46,104 INFO L195 MainTranslator]: Completed translation 11.43/5.50 [2019-03-28 22:51:46,105 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46 WrapperNode 11.43/5.50 [2019-03-28 22:51:46,105 INFO L132 PluginConnector]: ------------------------ END CACSL2BoogieTranslator---------------------------- 11.43/5.50 [2019-03-28 22:51:46,106 INFO L113 PluginConnector]: ------------------------Boogie Procedure Inliner---------------------------- 11.43/5.50 [2019-03-28 22:51:46,106 INFO L271 PluginConnector]: Initializing Boogie Procedure Inliner... 11.43/5.50 [2019-03-28 22:51:46,106 INFO L276 PluginConnector]: Boogie Procedure Inliner initialized 11.43/5.50 [2019-03-28 22:51:46,174 INFO L185 PluginConnector]: Executing the observer TypeChecker from plugin Boogie Procedure Inliner for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,180 INFO L185 PluginConnector]: Executing the observer Inliner from plugin Boogie Procedure Inliner for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,200 INFO L132 PluginConnector]: ------------------------ END Boogie Procedure Inliner---------------------------- 11.43/5.50 [2019-03-28 22:51:46,200 INFO L113 PluginConnector]: ------------------------Boogie Preprocessor---------------------------- 11.43/5.50 [2019-03-28 22:51:46,200 INFO L271 PluginConnector]: Initializing Boogie Preprocessor... 11.43/5.50 [2019-03-28 22:51:46,201 INFO L276 PluginConnector]: Boogie Preprocessor initialized 11.43/5.50 [2019-03-28 22:51:46,210 INFO L185 PluginConnector]: Executing the observer EnsureBoogieModelObserver from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,211 INFO L185 PluginConnector]: Executing the observer TypeChecker from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,211 INFO L185 PluginConnector]: Executing the observer ConstExpander from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,211 INFO L185 PluginConnector]: Executing the observer StructExpander from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,213 INFO L185 PluginConnector]: Executing the observer UnstructureCode from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,218 INFO L185 PluginConnector]: Executing the observer FunctionInliner from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,219 INFO L185 PluginConnector]: Executing the observer BoogieSymbolTableConstructor from plugin Boogie Preprocessor for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,220 INFO L132 PluginConnector]: ------------------------ END Boogie Preprocessor---------------------------- 11.43/5.50 [2019-03-28 22:51:46,220 INFO L113 PluginConnector]: ------------------------RCFGBuilder---------------------------- 11.43/5.50 [2019-03-28 22:51:46,220 INFO L271 PluginConnector]: Initializing RCFGBuilder... 11.43/5.50 [2019-03-28 22:51:46,220 INFO L276 PluginConnector]: RCFGBuilder initialized 11.43/5.50 [2019-03-28 22:51:46,222 INFO L185 PluginConnector]: Executing the observer RCFGBuilderObserver from plugin RCFGBuilder for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (1/1) ... 11.43/5.50 No working directory specified, using /export/starexec/sandbox/solver/bin/z3 11.43/5.50 Starting monitored process 1 with z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 (exit command is (exit), workingDir is null) 11.43/5.50 Waiting until toolchain timeout for monitored process 1 with z3 SMTLIB2_COMPLIANT=true -memory:4560 -smt2 -in -t:5000 11.43/5.50 [2019-03-28 22:51:46,289 INFO L130 BoogieDeclarations]: Found specification of procedure ULTIMATE.start 11.43/5.50 [2019-03-28 22:51:46,289 INFO L138 BoogieDeclarations]: Found implementation of procedure ULTIMATE.start 11.43/5.50 [2019-03-28 22:51:46,412 INFO L281 CfgBuilder]: Using the 1 location(s) as analysis (start of procedure ULTIMATE.start) 11.43/5.50 [2019-03-28 22:51:46,412 INFO L286 CfgBuilder]: Removed 5 assue(true) statements. 11.43/5.50 [2019-03-28 22:51:46,414 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.rcfgbuilder CFG 28.03 10:51:46 BoogieIcfgContainer 11.43/5.50 [2019-03-28 22:51:46,414 INFO L132 PluginConnector]: ------------------------ END RCFGBuilder---------------------------- 11.43/5.50 [2019-03-28 22:51:46,414 INFO L113 PluginConnector]: ------------------------BlockEncodingV2---------------------------- 11.43/5.50 [2019-03-28 22:51:46,414 INFO L271 PluginConnector]: Initializing BlockEncodingV2... 11.43/5.50 [2019-03-28 22:51:46,416 INFO L276 PluginConnector]: BlockEncodingV2 initialized 11.43/5.50 [2019-03-28 22:51:46,417 INFO L185 PluginConnector]: Executing the observer BlockEncodingObserver from plugin BlockEncodingV2 for "de.uni_freiburg.informatik.ultimate.plugins.generator.rcfgbuilder CFG 28.03 10:51:46" (1/1) ... 11.43/5.50 [2019-03-28 22:51:46,431 INFO L313 BlockEncoder]: Initial Icfg 6 locations, 7 edges 11.43/5.50 [2019-03-28 22:51:46,433 INFO L258 BlockEncoder]: Using Remove infeasible edges 11.43/5.50 [2019-03-28 22:51:46,433 INFO L263 BlockEncoder]: Using Maximize final states 11.43/5.50 [2019-03-28 22:51:46,434 INFO L270 BlockEncoder]: Using Minimize states even if more edges are added than removed.=false 11.43/5.50 [2019-03-28 22:51:46,434 INFO L276 BlockEncoder]: Using Minimize states using LBE with the strategy=SINGLE 11.43/5.50 [2019-03-28 22:51:46,436 INFO L296 BlockEncoder]: Using Remove sink states 11.43/5.50 [2019-03-28 22:51:46,437 INFO L171 BlockEncoder]: Using Apply optimizations until nothing changes=true 11.43/5.50 [2019-03-28 22:51:46,437 INFO L179 BlockEncoder]: Using Rewrite not-equals 11.43/5.50 [2019-03-28 22:51:46,451 INFO L185 BlockEncoder]: Using Use SBE 11.43/5.50 [2019-03-28 22:51:46,459 INFO L200 BlockEncoder]: SBE split 0 edges 11.43/5.50 [2019-03-28 22:51:46,464 INFO L70 emoveInfeasibleEdges]: Removed 1 edges and 0 locations because of local infeasibility 11.43/5.50 [2019-03-28 22:51:46,466 INFO L71 MaximizeFinalStates]: 0 new accepting states 11.43/5.50 [2019-03-28 22:51:46,479 INFO L100 BaseMinimizeStates]: Removed 6 edges and 3 locations by large block encoding 11.43/5.50 [2019-03-28 22:51:46,481 INFO L70 RemoveSinkStates]: Removed 1 edges and 1 locations by removing sink states 11.43/5.50 [2019-03-28 22:51:46,482 INFO L70 emoveInfeasibleEdges]: Removed 0 edges and 0 locations because of local infeasibility 11.43/5.50 [2019-03-28 22:51:46,482 INFO L71 MaximizeFinalStates]: 0 new accepting states 11.43/5.50 [2019-03-28 22:51:46,482 INFO L100 BaseMinimizeStates]: Removed 0 edges and 0 locations by large block encoding 11.43/5.50 [2019-03-28 22:51:46,483 INFO L70 RemoveSinkStates]: Removed 0 edges and 0 locations by removing sink states 11.43/5.50 [2019-03-28 22:51:46,483 INFO L313 BlockEncoder]: Encoded RCFG 2 locations, 2 edges 11.43/5.50 [2019-03-28 22:51:46,484 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.blockencoding CFG 28.03 10:51:46 BasicIcfg 11.43/5.50 [2019-03-28 22:51:46,484 INFO L132 PluginConnector]: ------------------------ END BlockEncodingV2---------------------------- 11.43/5.50 [2019-03-28 22:51:46,485 INFO L113 PluginConnector]: ------------------------TraceAbstraction---------------------------- 11.43/5.50 [2019-03-28 22:51:46,485 INFO L271 PluginConnector]: Initializing TraceAbstraction... 11.43/5.50 [2019-03-28 22:51:46,488 INFO L276 PluginConnector]: TraceAbstraction initialized 11.43/5.50 [2019-03-28 22:51:46,488 INFO L185 PluginConnector]: Executing the observer TraceAbstractionObserver from plugin TraceAbstraction for "CDTParser AST 28.03 10:51:45" (1/4) ... 11.43/5.50 [2019-03-28 22:51:46,489 INFO L205 PluginConnector]: Invalid model from TraceAbstraction for observer de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction.TraceAbstractionObserver@68625413 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction AST 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,489 INFO L185 PluginConnector]: Executing the observer TraceAbstractionObserver from plugin TraceAbstraction for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (2/4) ... 11.43/5.50 [2019-03-28 22:51:46,490 INFO L205 PluginConnector]: Invalid model from TraceAbstraction for observer de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction.TraceAbstractionObserver@68625413 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction AST 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,490 INFO L185 PluginConnector]: Executing the observer TraceAbstractionObserver from plugin TraceAbstraction for "de.uni_freiburg.informatik.ultimate.plugins.generator.rcfgbuilder CFG 28.03 10:51:46" (3/4) ... 11.43/5.50 [2019-03-28 22:51:46,490 INFO L205 PluginConnector]: Invalid model from TraceAbstraction for observer de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction.TraceAbstractionObserver@68625413 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction CFG 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,491 INFO L185 PluginConnector]: Executing the observer TraceAbstractionObserver from plugin TraceAbstraction for "de.uni_freiburg.informatik.ultimate.plugins.blockencoding CFG 28.03 10:51:46" (4/4) ... 11.43/5.50 [2019-03-28 22:51:46,492 INFO L112 eAbstractionObserver]: Analyzing ICFG theBenchmark.c_BEv2 11.43/5.50 [2019-03-28 22:51:46,502 INFO L156 ceAbstractionStarter]: Automizer settings: Hoare:true NWA Interpolation:ForwardPredicates Determinization: PREDICATE_ABSTRACTION 11.43/5.50 [2019-03-28 22:51:46,509 INFO L168 ceAbstractionStarter]: Appying trace abstraction to program that has 0 error locations. 11.43/5.50 [2019-03-28 22:51:46,527 INFO L257 AbstractCegarLoop]: Starting to check reachability of 0 error locations. 11.43/5.50 [2019-03-28 22:51:46,555 INFO L133 ementStrategyFactory]: Using default assertion order modulation 11.43/5.50 [2019-03-28 22:51:46,556 INFO L382 AbstractCegarLoop]: Interprodecural is true 11.43/5.50 [2019-03-28 22:51:46,556 INFO L383 AbstractCegarLoop]: Hoare is true 11.43/5.50 [2019-03-28 22:51:46,556 INFO L384 AbstractCegarLoop]: Compute interpolants for ForwardPredicates 11.43/5.50 [2019-03-28 22:51:46,557 INFO L385 AbstractCegarLoop]: Backedges is STRAIGHT_LINE 11.43/5.50 [2019-03-28 22:51:46,557 INFO L386 AbstractCegarLoop]: Determinization is PREDICATE_ABSTRACTION 11.43/5.50 [2019-03-28 22:51:46,557 INFO L387 AbstractCegarLoop]: Difference is false 11.43/5.50 [2019-03-28 22:51:46,557 INFO L388 AbstractCegarLoop]: Minimize is MINIMIZE_SEVPA 11.43/5.50 [2019-03-28 22:51:46,557 INFO L393 AbstractCegarLoop]: ======== Iteration 0==of CEGAR loop == AllErrorsAtOnce======== 11.43/5.50 [2019-03-28 22:51:46,571 INFO L276 IsEmpty]: Start isEmpty. Operand 2 states. 11.43/5.50 [2019-03-28 22:51:46,577 INFO L282 IsEmpty]: Finished isEmpty. No accepting run. 11.43/5.50 [2019-03-28 22:51:46,580 INFO L343 DoubleDeckerVisitor]: Before removal of dead ends 2 states. 11.43/5.50 [2019-03-28 22:51:46,630 INFO L448 ceAbstractionStarter]: For program point ULTIMATE.startENTRY(line -1) no Hoare annotation was computed. 11.43/5.50 [2019-03-28 22:51:46,630 INFO L451 ceAbstractionStarter]: At program point L26-2(lines 26 29) the Hoare annotation is: true 11.43/5.50 [2019-03-28 22:51:46,638 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction CFG 28.03 10:51:46 BasicIcfg 11.43/5.50 [2019-03-28 22:51:46,638 INFO L132 PluginConnector]: ------------------------ END TraceAbstraction---------------------------- 11.43/5.50 [2019-03-28 22:51:46,639 INFO L113 PluginConnector]: ------------------------BuchiAutomizer---------------------------- 11.43/5.50 [2019-03-28 22:51:46,639 INFO L271 PluginConnector]: Initializing BuchiAutomizer... 11.43/5.50 [2019-03-28 22:51:46,642 INFO L276 PluginConnector]: BuchiAutomizer initialized 11.43/5.50 [2019-03-28 22:51:46,643 INFO L102 BuchiAutomizer]: Safety of program was proven or not checked, starting termination analysis 11.43/5.50 [2019-03-28 22:51:46,643 INFO L185 PluginConnector]: Executing the observer BuchiAutomizerObserver from plugin BuchiAutomizer for "CDTParser AST 28.03 10:51:45" (1/5) ... 11.43/5.50 [2019-03-28 22:51:46,644 INFO L205 PluginConnector]: Invalid model from BuchiAutomizer for observer de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer.BuchiAutomizerObserver@4976c332 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer AST 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,644 INFO L102 BuchiAutomizer]: Safety of program was proven or not checked, starting termination analysis 11.43/5.50 [2019-03-28 22:51:46,644 INFO L185 PluginConnector]: Executing the observer BuchiAutomizerObserver from plugin BuchiAutomizer for "de.uni_freiburg.informatik.ultimate.plugins.generator.cacsl2boogietranslator AST 28.03 10:51:46" (2/5) ... 11.43/5.50 [2019-03-28 22:51:46,645 INFO L205 PluginConnector]: Invalid model from BuchiAutomizer for observer de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer.BuchiAutomizerObserver@4976c332 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer AST 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,645 INFO L102 BuchiAutomizer]: Safety of program was proven or not checked, starting termination analysis 11.43/5.50 [2019-03-28 22:51:46,645 INFO L185 PluginConnector]: Executing the observer BuchiAutomizerObserver from plugin BuchiAutomizer for "de.uni_freiburg.informatik.ultimate.plugins.generator.rcfgbuilder CFG 28.03 10:51:46" (3/5) ... 11.43/5.50 [2019-03-28 22:51:46,645 INFO L205 PluginConnector]: Invalid model from BuchiAutomizer for observer de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer.BuchiAutomizerObserver@4976c332 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer CFG 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,646 INFO L102 BuchiAutomizer]: Safety of program was proven or not checked, starting termination analysis 11.43/5.50 [2019-03-28 22:51:46,646 INFO L185 PluginConnector]: Executing the observer BuchiAutomizerObserver from plugin BuchiAutomizer for "de.uni_freiburg.informatik.ultimate.plugins.blockencoding CFG 28.03 10:51:46" (4/5) ... 11.43/5.50 [2019-03-28 22:51:46,646 INFO L205 PluginConnector]: Invalid model from BuchiAutomizer for observer de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer.BuchiAutomizerObserver@4976c332 and model type de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer CFG 28.03 10:51:46, skipping insertion in model container 11.43/5.50 [2019-03-28 22:51:46,646 INFO L102 BuchiAutomizer]: Safety of program was proven or not checked, starting termination analysis 11.43/5.50 [2019-03-28 22:51:46,646 INFO L185 PluginConnector]: Executing the observer BuchiAutomizerObserver from plugin BuchiAutomizer for "de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction CFG 28.03 10:51:46" (5/5) ... 11.43/5.50 [2019-03-28 22:51:46,648 INFO L375 chiAutomizerObserver]: Analyzing ICFG theBenchmark.c_BEv2 11.43/5.50 [2019-03-28 22:51:46,676 INFO L133 ementStrategyFactory]: Using default assertion order modulation 11.43/5.50 [2019-03-28 22:51:46,676 INFO L374 BuchiCegarLoop]: Interprodecural is true 11.43/5.50 [2019-03-28 22:51:46,676 INFO L375 BuchiCegarLoop]: Hoare is true 11.43/5.50 [2019-03-28 22:51:46,677 INFO L376 BuchiCegarLoop]: Compute interpolants for ForwardPredicates 11.43/5.50 [2019-03-28 22:51:46,677 INFO L377 BuchiCegarLoop]: Backedges is STRAIGHT_LINE 11.43/5.50 [2019-03-28 22:51:46,677 INFO L378 BuchiCegarLoop]: Determinization is PREDICATE_ABSTRACTION 11.43/5.50 [2019-03-28 22:51:46,677 INFO L379 BuchiCegarLoop]: Difference is false 11.43/5.50 [2019-03-28 22:51:46,677 INFO L380 BuchiCegarLoop]: Minimize is MINIMIZE_SEVPA 11.43/5.50 [2019-03-28 22:51:46,677 INFO L383 BuchiCegarLoop]: ======== Iteration 0==of CEGAR loop == BuchiCegarLoop======== 11.43/5.50 [2019-03-28 22:51:46,680 INFO L72 BuchiIsEmpty]: Start buchiIsEmpty. Operand 2 states. 11.43/5.50 [2019-03-28 22:51:46,697 INFO L131 ngComponentsAnalysis]: Automaton has 1 accepting balls. 1 11.43/5.50 [2019-03-28 22:51:46,698 INFO L87 BuchiIsEmpty]: Finished buchiIsEmpty Result is false 11.43/5.50 [2019-03-28 22:51:46,698 INFO L119 BuchiIsEmpty]: Starting construction of run 11.43/5.50 [2019-03-28 22:51:46,703 INFO L867 BuchiCegarLoop]: Counterexample stem histogram [1] 11.43/5.50 [2019-03-28 22:51:46,703 INFO L868 BuchiCegarLoop]: Counterexample loop histogram [1] 11.43/5.50 [2019-03-28 22:51:46,703 INFO L442 BuchiCegarLoop]: ======== Iteration 1============ 11.43/5.50 [2019-03-28 22:51:46,703 INFO L72 BuchiIsEmpty]: Start buchiIsEmpty. Operand 2 states. 11.43/5.50 [2019-03-28 22:51:46,704 INFO L131 ngComponentsAnalysis]: Automaton has 1 accepting balls. 1 11.43/5.50 [2019-03-28 22:51:46,704 INFO L87 BuchiIsEmpty]: Finished buchiIsEmpty Result is false 11.43/5.50 [2019-03-28 22:51:46,704 INFO L119 BuchiIsEmpty]: Starting construction of run 11.43/5.50 [2019-03-28 22:51:46,704 INFO L867 BuchiCegarLoop]: Counterexample stem histogram [1] 11.43/5.50 [2019-03-28 22:51:46,705 INFO L868 BuchiCegarLoop]: Counterexample loop histogram [1] 11.43/5.50 [2019-03-28 22:51:46,710 INFO L794 eck$LassoCheckResult]: Stem: 3#ULTIMATE.startENTRYtrue [18] ULTIMATE.startENTRY-->L26-2: Formula: (and (= v_ULTIMATE.start_main_~y~0_1 |v_ULTIMATE.start_main_#t~nondet1_4|) (= v_ULTIMATE.start_main_~x~0_1 |v_ULTIMATE.start_main_#t~nondet0_4|)) InVars {} OutVars{ULTIMATE.start_main_#t~nondet0=|v_ULTIMATE.start_main_#t~nondet0_1|, ULTIMATE.start_main_~y~0=v_ULTIMATE.start_main_~y~0_1, ULTIMATE.start_main_#t~nondet1=|v_ULTIMATE.start_main_#t~nondet1_1|, ULTIMATE.start_main_~x~0=v_ULTIMATE.start_main_~x~0_1, ULTIMATE.start_main_#res=|v_ULTIMATE.start_main_#res_2|} AuxVars[|v_ULTIMATE.start_main_#t~nondet1_4|, |v_ULTIMATE.start_main_#t~nondet0_4|] AssignedVars[ULTIMATE.start_main_#t~nondet0, ULTIMATE.start_main_#t~nondet1, ULTIMATE.start_main_#res, ULTIMATE.start_main_~y~0, ULTIMATE.start_main_~x~0] 4#L26-2true 11.43/5.50 [2019-03-28 22:51:46,710 INFO L796 eck$LassoCheckResult]: Loop: 4#L26-2true [22] L26-2-->L26-2: Formula: (and (= v_ULTIMATE.start_main_~x~0_7 (+ v_ULTIMATE.start_main_~y~0_7 v_ULTIMATE.start_main_~x~0_8)) (= v_ULTIMATE.start_main_~y~0_6 (* (- 2) v_ULTIMATE.start_main_~y~0_7)) (< 0 v_ULTIMATE.start_main_~x~0_8)) InVars {ULTIMATE.start_main_~y~0=v_ULTIMATE.start_main_~y~0_7, ULTIMATE.start_main_~x~0=v_ULTIMATE.start_main_~x~0_8} OutVars{ULTIMATE.start_main_~y~0=v_ULTIMATE.start_main_~y~0_6, ULTIMATE.start_main_~x~0=v_ULTIMATE.start_main_~x~0_7} AuxVars[] AssignedVars[ULTIMATE.start_main_~y~0, ULTIMATE.start_main_~x~0] 4#L26-2true 11.43/5.50 [2019-03-28 22:51:46,716 INFO L144 PredicateUnifier]: Initialized classic predicate unifier 11.43/5.50 [2019-03-28 22:51:46,716 INFO L82 PathProgramCache]: Analyzing trace with hash 49, now seen corresponding path program 1 times 11.43/5.50 [2019-03-28 22:51:46,718 INFO L223 ckRefinementStrategy]: Switched to mode SMTINTERPOL_TREE_INTERPOLANTS 11.43/5.50 [2019-03-28 22:51:46,719 INFO L69 tionRefinementEngine]: Using refinement strategy CamelRefinementStrategy 11.43/5.50 [2019-03-28 22:51:46,747 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,747 INFO L103 rtionOrderModulation]: Keeping assertion order NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,748 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,766 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,769 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,788 INFO L144 PredicateUnifier]: Initialized classic predicate unifier 11.43/5.50 [2019-03-28 22:51:46,788 INFO L82 PathProgramCache]: Analyzing trace with hash 53, now seen corresponding path program 1 times 11.43/5.50 [2019-03-28 22:51:46,789 INFO L223 ckRefinementStrategy]: Switched to mode SMTINTERPOL_TREE_INTERPOLANTS 11.43/5.50 [2019-03-28 22:51:46,789 INFO L69 tionRefinementEngine]: Using refinement strategy CamelRefinementStrategy 11.43/5.50 [2019-03-28 22:51:46,790 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,791 INFO L103 rtionOrderModulation]: Keeping assertion order NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,791 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,797 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,800 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,803 INFO L144 PredicateUnifier]: Initialized classic predicate unifier 11.43/5.50 [2019-03-28 22:51:46,803 INFO L82 PathProgramCache]: Analyzing trace with hash 1541, now seen corresponding path program 1 times 11.43/5.50 [2019-03-28 22:51:46,804 INFO L223 ckRefinementStrategy]: Switched to mode SMTINTERPOL_TREE_INTERPOLANTS 11.43/5.50 [2019-03-28 22:51:46,804 INFO L69 tionRefinementEngine]: Using refinement strategy CamelRefinementStrategy 11.43/5.50 [2019-03-28 22:51:46,805 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,805 INFO L103 rtionOrderModulation]: Keeping assertion order NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,806 INFO L119 rtionOrderModulation]: Craig_TreeInterpolation forces the order to NOT_INCREMENTALLY 11.43/5.50 [2019-03-28 22:51:46,810 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,814 INFO L136 AnnotateAndAsserter]: Conjunction of SSA is sat 11.43/5.50 [2019-03-28 22:51:46,893 INFO L202 PluginConnector]: Adding new model de.uni_freiburg.informatik.ultimate.plugins.generator.buchiautomizer CFG 28.03 10:51:46 BasicIcfg 11.43/5.50 [2019-03-28 22:51:46,894 INFO L132 PluginConnector]: ------------------------ END BuchiAutomizer---------------------------- 11.43/5.50 [2019-03-28 22:51:46,894 INFO L168 Benchmark]: Toolchain (without parser) took 1018.78 ms. Allocated memory was 649.6 MB in the beginning and 663.7 MB in the end (delta: 14.2 MB). Free memory was 559.2 MB in the beginning and 579.7 MB in the end (delta: -20.5 MB). There was no memory consumed. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,896 INFO L168 Benchmark]: CDTParser took 0.16 ms. Allocated memory is still 649.6 MB. Free memory is still 580.0 MB. There was no memory consumed. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,897 INFO L168 Benchmark]: CACSL2BoogieTranslator took 227.98 ms. Allocated memory is still 649.6 MB. Free memory was 559.2 MB in the beginning and 549.5 MB in the end (delta: 9.7 MB). Peak memory consumption was 9.7 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,897 INFO L168 Benchmark]: Boogie Procedure Inliner took 94.17 ms. Allocated memory was 649.6 MB in the beginning and 663.7 MB in the end (delta: 14.2 MB). Free memory was 549.5 MB in the beginning and 630.6 MB in the end (delta: -81.1 MB). Peak memory consumption was 20.2 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,898 INFO L168 Benchmark]: Boogie Preprocessor took 19.58 ms. Allocated memory is still 663.7 MB. Free memory was 630.6 MB in the beginning and 629.5 MB in the end (delta: 1.1 MB). Peak memory consumption was 1.1 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,899 INFO L168 Benchmark]: RCFGBuilder took 193.63 ms. Allocated memory is still 663.7 MB. Free memory was 629.5 MB in the beginning and 615.4 MB in the end (delta: 14.1 MB). Peak memory consumption was 14.1 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,900 INFO L168 Benchmark]: BlockEncodingV2 took 69.76 ms. Allocated memory is still 663.7 MB. Free memory was 615.4 MB in the beginning and 611.1 MB in the end (delta: 4.3 MB). Peak memory consumption was 4.3 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,900 INFO L168 Benchmark]: TraceAbstraction took 153.91 ms. Allocated memory is still 663.7 MB. Free memory was 610.0 MB in the beginning and 601.4 MB in the end (delta: 8.6 MB). Peak memory consumption was 8.6 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,901 INFO L168 Benchmark]: BuchiAutomizer took 254.60 ms. Allocated memory is still 663.7 MB. Free memory was 601.4 MB in the beginning and 579.7 MB in the end (delta: 21.7 MB). Peak memory consumption was 21.7 MB. Max. memory is 50.3 GB. 11.43/5.50 [2019-03-28 22:51:46,906 INFO L337 ainManager$Toolchain]: ####################### End [Toolchain 1] ####################### 11.43/5.50 --- Results --- 11.43/5.50 * Results from de.uni_freiburg.informatik.ultimate.plugins.blockencoding: 11.43/5.50 - StatisticsResult: Initial Icfg 11.43/5.50 6 locations, 7 edges 11.43/5.50 - StatisticsResult: Encoded RCFG 11.43/5.50 2 locations, 2 edges 11.43/5.50 * Results from de.uni_freiburg.informatik.ultimate.core: 11.43/5.50 - StatisticsResult: Toolchain Benchmarks 11.43/5.50 Benchmark results are: 11.43/5.50 * CDTParser took 0.16 ms. Allocated memory is still 649.6 MB. Free memory is still 580.0 MB. There was no memory consumed. Max. memory is 50.3 GB. 11.43/5.50 * CACSL2BoogieTranslator took 227.98 ms. Allocated memory is still 649.6 MB. Free memory was 559.2 MB in the beginning and 549.5 MB in the end (delta: 9.7 MB). Peak memory consumption was 9.7 MB. Max. memory is 50.3 GB. 11.43/5.50 * Boogie Procedure Inliner took 94.17 ms. Allocated memory was 649.6 MB in the beginning and 663.7 MB in the end (delta: 14.2 MB). Free memory was 549.5 MB in the beginning and 630.6 MB in the end (delta: -81.1 MB). Peak memory consumption was 20.2 MB. Max. memory is 50.3 GB. 11.43/5.50 * Boogie Preprocessor took 19.58 ms. Allocated memory is still 663.7 MB. Free memory was 630.6 MB in the beginning and 629.5 MB in the end (delta: 1.1 MB). Peak memory consumption was 1.1 MB. Max. memory is 50.3 GB. 11.43/5.50 * RCFGBuilder took 193.63 ms. Allocated memory is still 663.7 MB. Free memory was 629.5 MB in the beginning and 615.4 MB in the end (delta: 14.1 MB). Peak memory consumption was 14.1 MB. Max. memory is 50.3 GB. 11.43/5.50 * BlockEncodingV2 took 69.76 ms. Allocated memory is still 663.7 MB. Free memory was 615.4 MB in the beginning and 611.1 MB in the end (delta: 4.3 MB). Peak memory consumption was 4.3 MB. Max. memory is 50.3 GB. 11.43/5.50 * TraceAbstraction took 153.91 ms. Allocated memory is still 663.7 MB. Free memory was 610.0 MB in the beginning and 601.4 MB in the end (delta: 8.6 MB). Peak memory consumption was 8.6 MB. Max. memory is 50.3 GB. 11.43/5.50 * BuchiAutomizer took 254.60 ms. Allocated memory is still 663.7 MB. Free memory was 601.4 MB in the beginning and 579.7 MB in the end (delta: 21.7 MB). Peak memory consumption was 21.7 MB. Max. memory is 50.3 GB. 11.43/5.50 * Results from de.uni_freiburg.informatik.ultimate.plugins.generator.traceabstraction: 11.43/5.50 - AllSpecificationsHoldResult: All specifications hold 11.43/5.50 We were not able to verify any specifiation because the program does not contain any specification. 11.43/5.50 - InvariantResult [Line: 26]: Loop Invariant 11.43/5.50 Derived loop invariant: 1 11.43/5.50 - StatisticsResult: Ultimate Automizer benchmark data 11.43/5.50 CFG has 1 procedures, 2 locations, 0 error locations. SAFE Result, 0.0s OverallTime, 0 OverallIterations, 0 TraceHistogramMax, 0.0s AutomataDifference, 0.0s DeadEndRemovalTime, 0.0s HoareAnnotationTime, HoareTripleCheckerStatistics: No data available, PredicateUnifierStatistics: No data available, 0.0s BasicInterpolantAutomatonTime, BiggestAbstraction: size=2occurred in iteration=0, traceCheckStatistics: No data available, InterpolantConsolidationStatistics: No data available, PathInvariantsStatistics: No data available, 0/0 InterpolantCoveringCapability, TotalInterpolationStatistics: No data available, 0.0s AbstIntTime, 0 AbstIntIterations, 0 AbstIntStrong, NaN AbsIntWeakeningRatio, NaN AbsIntAvgWeakeningVarsNumRemoved, NaN AbsIntAvgWeakenedConjuncts, 0.0s DumpTime, AutomataMinimizationStatistics: No data available, HoareAnnotationStatistics: 0.0s HoareAnnotationTime, 1 LocationsWithAnnotation, 1 PreInvPairs, 1 NumberOfFragments, 1 HoareAnnotationTreeSize, 1 FomulaSimplifications, 0 FormulaSimplificationTreeSizeReduction, 0.0s HoareSimplificationTime, 1 FomulaSimplificationsInter, 0 FormulaSimplificationTreeSizeReductionInter, 0.0s HoareSimplificationTimeInter, RefinementEngineStatistics: No data available, ReuseStatistics: No data available 11.43/5.50 - StatisticsResult: Constructed decomposition of program 11.43/5.50 Trivial decomposition into one nonterminating module. 11.43/5.50 - StatisticsResult: Timing statistics 11.43/5.50 BüchiAutomizer plugin needed 0.2s and 1 iterations. TraceHistogramMax:1. Analysis of lassos took 0.1s. Construction of modules took 0.0s. Büchi inclusion checks took 0.0s. Highest rank in rank-based complementation 0. Minimization of det autom 0. Minimization of nondet autom 0. Automata minimization No data available. Non-live state removal took 0.0s Buchi closure took 0.0s. Biggest automaton had -1 states and ocurred in iteration -1. Nontrivial modules had stage [0, 0, 0, 0, 0]. InterpolantCoveringCapabilityFinite: 0/0 InterpolantCoveringCapabilityBuchi: 0/0 HoareTripleCheckerStatistics: No data available LassoAnalysisResults: nont1 unkn0 SFLI0 SFLT0 conc0 concLT0 SILN0 SILU0 SILI0 SILT0 lasso0 LassoPreprocessingBenchmarks: LassoTerminationAnalysisBenchmarks: not availableLassoTerminationAnalysisBenchmarks: LassoNonterminationAnalysisSatFixpoint: 0 LassoNonterminationAnalysisSatUnbounded: 0 LassoNonterminationAnalysisUnsat: 0 LassoNonterminationAnalysisUnknown: 0 LassoNonterminationAnalysisTime: 0.0s 11.43/5.50 - TerminationAnalysisResult: Nontermination possible 11.43/5.50 Buchi Automizer proved that your program is nonterminating for some inputs 11.43/5.50 - FixpointNonTerminationResult [Line: 26]: Nontermination argument in form of an infinite program execution. 11.43/5.50 Nontermination argument in form of an infinite execution 11.43/5.50 State at position 0 is 11.43/5.50 {} 11.43/5.50 State at position 1 is 11.43/5.50 {org.eclipse.cdt.internal.core.dom.parser.c.CASTFunctionCallExpression@2d92b81d=0, \result=0, org.eclipse.cdt.internal.core.dom.parser.c.CASTFunctionCallExpression@68275fea=0, x=1, y=0} 11.43/5.50 - StatisticsResult: NonterminationArgumentStatistics 11.43/5.50 Fixpoint 11.43/5.50 - NonterminatingLassoResult [Line: 26]: Nonterminating execution 11.43/5.50 Found a nonterminating execution for the following lasso shaped sequence of statements. 11.43/5.50 Stem: 11.43/5.50 [L23] int x, y; 11.43/5.50 [L24] x = __VERIFIER_nondet_int() 11.43/5.50 [L25] y = __VERIFIER_nondet_int() 11.43/5.50 Loop: 11.43/5.50 [L26] COND TRUE x > 0 11.43/5.50 [L27] x = x + y 11.43/5.50 [L28] y = -2*y 11.43/5.50 End of lasso representation. 11.43/5.50 RESULT: Ultimate proved your program to be incorrect! 11.43/5.50 !SESSION 2019-03-28 22:51:42.541 ----------------------------------------------- 11.43/5.50 eclipse.buildId=unknown 11.43/5.50 java.version=1.8.0_181 11.43/5.50 java.vendor=Oracle Corporation 11.43/5.50 BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US 11.43/5.50 Framework arguments: -tc ./../AutomizerAndBuchiAutomizerCInlineWithBlockEncoding.xml -s ./../termcomp2017.epf -i /export/starexec/sandbox/benchmark/theBenchmark.c 11.43/5.50 Command-line arguments: -os linux -ws gtk -arch x86_64 -consoleLog -data @user.home/.ultimate -tc ./../AutomizerAndBuchiAutomizerCInlineWithBlockEncoding.xml -s ./../termcomp2017.epf -data /export/starexec/sandbox/tmp -i /export/starexec/sandbox/benchmark/theBenchmark.c 11.43/5.50 11.43/5.50 !ENTRY org.eclipse.core.resources 2 10035 2019-03-28 22:51:47.143 11.43/5.50 !MESSAGE The workspace will exit with unsaved changes in this session. 11.43/5.50 Received shutdown request... 11.43/5.50 Ultimate: 11.43/5.50 GTK+ Version Check 11.43/5.50 EOF